This is a draft document that was built and uploaded automatically. It may document beta software and be incomplete or even incorrect. Use this document at your own risk.

Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
Deployment Guide / Pre-built image deployment
Applies to SUSE Linux Enterprise Micro 5.2

Part II Pre-built image deployment

  
  • 5 Description of pre-built images

    • SLE Micro can be deployed using pre-built images. Currently, there are two types of images available: raw disk images and selfinstall ISOs.

  • 6 Deploying raw images

    • SUSE Linux Enterprise Micro provides raw images that can be directly deployed to your device storage: a memory card, USB flash drive, or a hard disk. The options for which type of device you can deploy the image to depend on your particular hardware—follow the guidance in your vendor documentation.

  • 7 Deploying selfinstall images

    • The chapter describes deployment of SLE Micro from selfinstall pre-built ISO images.

  • 8 Configuring with Ignition

    • This chapter provides details about the Ignition provisioning tool that is used to set up a machine. Here you will learn how to provide required configuration files used for the machine definition.

  • 9 Configuring with Combustion

    • This chapter describes Combustion, the tool used to configure your system on first boot according to your configuration.

  • 10 Post-deployment steps

    • The chapter describes registration of SLE Micro and covers extensions available for SLE Micro.